PLA Filament Small Spool Translucent Blue
The 1.75mm translucent blue
PLA Filament from
MakerBot is a bioplastic derived from corn. It's guaranteed not to have any heavy metals, phthalates, or BPA (Bisphenol A). The small spool provides 0.5 lbs (0.2 kg) of PLA plastic filament.
The MakerBot PLA Filament is comprehensively quality-tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that the MakerBot MakerWare software offers and will reliably slice and print every type of 3D printing available.
If you're new to 3D printing, the MakerBot PLA Filament is a good material to start with. The MakerBot PLA Filament also adheres well to acrylic and to blue painter's tape. Prints with a large bottom may have a tendency to curl. To prevent curling, use rafts.
To ensure high filament quality and performance, store the MakerBot PLA Filament in a cool, dry place when not in use. This is because the MakerBot PLA Filament will absorb moisture from the air if exposed to humidity for long periods of time. Also, your build plate must be level, clean, and oil-free to ensure the highest quality 3D printing. It is also recommended that you use the MakerBot PLA Filament and your MakerBot 3D printer in a well-ventilated area.
Choose the Makerbot MP05759 PLA Filament which is an easy to use bioplastic material that adheres great to the acrylic for your MakerBot 3D Printer! This PLA Filament is guaranteed not to have any heavy metals, phthalates or BPA materials. MakerBot PLA Filament performs well on most prints. Keep the MakerBot PLA Filament in a cool, dry place because it can absorb moisture from the air and long-term exposure to humidity can compromise the quality of the filament.
PLA Filament Features
- Bioplastic Derived From Corn
- Quality Tested at 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2
- Adheres to Acrylic and to MakerBot Build Plate Tape
- Spool Diameter: 15cm, Spool Width: 4cm
- Compatibility: Replicator 2, Replicator Mini, Replicator, Replicator Z18
With the small spool Makerbot MP05759 PLA Filament in Translucent Blue you can produce your own objects on a 3D printer!